DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings.
Figure 72. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter Description
Dynamic IPv6 Addresses
Mode of dynamic IPv6
address assignment
Select the needed value from the drop-down list.
• Disable: Clients' IPv6 addresses are assigned manually.
• Stateful: The built-in DHCPv6 server of the access point
allocates addresses from the range specified in the Address
range fields. Also when this value is selected, the Static IP
Addresses and Hosts sections are displayed on the tab.
• Stateless: Clients themselves configure IPv6 addresses
using the prefix.
Address range
The start and the end values for the latest hextet (16 bit) of the range
of IPv6 addresses which the DHCPv6 server distributes to clients.
Lease time The lifetime of IPv6 addresses provided to clients.
When all needed settings are configured, click the APPLY button.
Page 86 of 235
To Next Page
Loading...
