DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Overview
Software
Network functions
· DHCP server/relay
· Advanced configuration of built-in DHCP server
· Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation
· Automatic obtainment of LAN IP address (for access point/repeater/client
modes)
· DNS relay
· Dynamic DNS
· Static IPv4/IPv6 routing
· IGMP Proxy
· RIP
· Support of UPnP IGD
· Support of VLAN
· WAN ping respond
· Support of SIP ALG
· Support of RTSP
· WAN failover
· Autonegotiation of speed, duplex mode, and flow control / Manual speed and
duplex mode setup for each Ethernet port
· Built-in UDPXY application
Firewall functions
· Network Address Translation (NAT)
· Stateful Packet Inspection (SPI)
· IPv4/IPv6 filter
· MAC filter
· URL filter
· DMZ
· Virtual servers
· Built-in Yandex.DNS web content filtering service
· Built-in SkyDNS web content filtering service
VPN
· IPsec/PPTP/L2TP/PPPoE pass-through
· PPTP/L2TP tunnels
· IPsec tunnels
Transport/Tunnel mode
IKEv1/IKEv2 support
DES encryption
NAT Traversal
Support of DPD (Keep-alive for VPN tunnels)
Management and monitoring
· Local and remote access to settings through SSH/TELNET/WEB
(HTTP/HTTPS)
· Bilingual web-based interface for configuration and management
(Russian/English)
· Notification on connection problems and auto redirect to settings
· Firmware update via web-based interface
· Automatic notification on new firmware version
· Saving/restoring configuration to/from file
· Support of logging to remote host
· Automatic synchronization of system time with NTP server and manual
time/date setup
· Ping utility
· Traceroute utility
· TR-069 client
· SNMP agent (SNMPv2/v3)
· Schedules for filters rules, automatic reboot, and enabling/disabling wireless
network
· Automatic upload of configuration file from ISP's server (Auto Provision)
Page 9 of 235
To Next Page
Loading...
