DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter Description
Primary IPv6 DNS
server/Secondary IPv6
DNS server
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
Figure 84. The page for creating a new Static IPv6 connection. The Miscellaneous section.
Parameter Description
Miscellaneous
RIPng
Move the switch to the right to allow using RIPng for this
connection.
Ping
If the switch is moved to the right, the access point responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
When all needed settings are configured, click the APPLY button.
Page 98 of 235
To Next Page
Loading...
