D-Link DES-1228 - Page 120

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
115
config mgmt_pkt_priority
Purpose This command is used to configure the manangement packet priority of the Switch.
Syntax
config mgmt_pkt_priority [default | <priority 0-7>]
Description This command is used to configure the manangement packet priority of the Switch.
Parameters
default | <priority 0-7> - This field specifies the default VLAN priority value
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the default value to the management packet priority of the Switch:
DES-1228/ME:4#config mgmt_pkt_priority default
Command: config mgmt_pkt_priority default
Success.
DES-1228/ME:4#
show mgmt_pkt_priority
Purpose This command is used to display the manangement packet priority of the Switch.
Syntax
show mgmt_pkt_priority
Description This command is used to display the manangement packet priority of the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the default value to the management packet priority of the Switch:
DES-1228/ME:4#show mgmt_pkt_priority
Command: show mgmt_pkt_priority
Management Packet Priority : default
DES-1228/ME:4#