DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
52
config snmp linkchange_traps ports
Purpose Used to configure SNMP link changing port traps/
Syntax
config snmp l
inkchange_traps
ports [all|<por
tlist>] [enable|
d
isable] Description Used to configure SNMP link changing port traps/
Parameters
all <portlist> − The user can define either all ports or a list of port that will be configured.
[enable|disable] – The user can enable this function or disable this function for the
abovementioned ports.
Restrictions Only Administrator-level users can issue this command.
Example Usage:
To enable SNMP link changing port traps:
DES-1228/ME:4#config snmp linkchange_traps ports all enable
Command: config snmp linkchange_traps ports all enable
Success.
enable snmp linkchange_traps
Purpose Used to enable SNMP link changing traps on the Switch.
Syntax
enable snmp linkchange_traps
Description Used to enable SNMP link changing traps on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example Usage:
To enable SNMP link changing traps:
DES-1228/ME:4#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
disable snmp linkchange_traps
Purpose Used to disable SNMP link changing traps on the Switch.
Syntax
disable snmp linkchange_traps
Description Used to disable SNMP link changing traps on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
To Next Page
Loading...
