DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
104
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
UDP Port (514 or
6000-65535)
Type the UDP port number used for sending Syslog messages. The default
is 0.
Status
Choose Enabled or Disabled to activate or deactivate.
To set the System Log Server configuration, click Apply. To delete an entry from the System
Log Server window, click the corresponding
under the Delete heading of the entry you
wish to delete. To return to the Current System Log Servers window, click the Show All
System Log Servers link.
PAE Access Entity (802.1X)
Understanding 802.1x Port-based Network Access Control
The Switch is an implementation of the server side of IEEE 802.1x Port-Based Network
Access Control. Through this mechanism, users have to be authorized before being able to
access the network. See the following figure:
To Next Page
Loading...
