DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
136
SNMP host for the Switch.
SNMP Version V1 – To specify that SNMP version 1 will be used.
V2
– To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv
– To specify that the SNMP version 3 will be used, with
a NoAuth-NoPriv security level.
V3-NoAuth-NoPriv – To specify that the SNMP version 3 will be used, with
a NoAuth-NoPriv security level.
V3-Auth-NoPriv – To specify that the SNMP version 3 will be used, with an
Auth-NoPriv security level.
V3-Auth-Priv
– To specify that the SNMP version 3 will be used, with an
Auth-Priv security level.
Community String or
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click Apply. To return to the
SNMP Host Table
, click the
Show All SNMP Host Table Entries
link.
SNMP Engine ID
The Engine ID is a unique identifier used for SNMP V3 implementations. This is an
alphanumeric string used to identify the SNMP engine on the Switch.
To display the Switch’s SNMP Engine ID, open the SNMP V3 folder, and click on the
SNMP Engine ID
link. This will open the
SNMP Engine ID Configuration
window, as
shown below.
Figure 7- 30. SNMP Engine ID Configuration
To change the Engine ID, type the new Engine ID in the space provided and click the Apply
button.
To Next Page
Loading...
