DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
162
Figure 9- 11. Reset System window
The Reset Config option will reset all of the Switch’s configuration parameters to their
factory defaults, without saving these default values to the Switch’s non-volatile RAM. If the
Switch is reset with this option enabled, and
Save Changes
is not executed, the Switch will
return to the last saved configuration when rebooted.
Figure 9- 12. Reset Config window
Logout
Use the
Logout
page to logout of the Switch’s Web-based management agent by clicking on
the Log Out button.
Figure 9- 13. Logout window
To Next Page
Loading...
