DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
176
Figure 10- 20. Firmware Upgrade window
Configuration File Backup/Restore
This screen is used to upgrade configuration files from the commander switch to the member
switch. Member switches will be listed in the table and will be specified by Port (port on the
CS where the MS resides), MAC Address, Model Name, and Version. To specify a certain
Switch for upgrading configuration files, click its corresponding radio button under the Port
heading. To update the configuration file, enter the Server IP Address where the firmware
resides and enter the
Path/Filename
of the firmware. Click Download to initiate the file
transfer.
Figure 10- 21. Configuration File Backup/Restore window
To Next Page
Loading...
