DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
166
Topology
The Topology window will be used to configure and manage the Switch within the SIM group
and requires Java script to function properly on your computer. The following message should
appear the first time the user clicks the Topology link in the Single IP Management folder.
Figure 10- 3. Java window
Clicking the here link will setup the Java Runtime Environment on your server and lead you
to the topology window, as seen below.
Figure 10- 4. Single IP Management window-Tree View
The Tree View window holds the following information under the Data tab:
Parameter Description
Device Name This field will display the Device Name of the switches in the SIM group
configured by the user. If no Device Name is configured by the name, it will
be given the name default and tagged with the last six digits of the MAC
Address to identify it.
Local Port
Displays the number of the physical port on the CS that the MS or CaS is
connected to. The CS will have no entry in this field.
Speed
Displays the connection speed between the CS and the MS or CaS.
Remote Port
Displays the number of the physical port on the MS or CaS that the CS is
connected to. The CS will have no entry in this field.
MAC Address
Displays the MAC Address of the corresponding Switch.
Model Name Displays the full Model Name of the corresponding Switch.
To Next Page
Loading...
