DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
138
Parameter Description
Time Interval
Select the desired setting between 1s and 60s, where “s” stands for
seconds. The default value is one second.
Record Number
Select number of times the Switch will be polled between 20 and 200. The
default value is 200.
Click Clear to refresh the graph. Click Apply to set changes implemented.
CPU Utilization
The CPU Utilization displays the percentage of the CPU being used, expressed as an integer
percentage and calculated as a simple average by time interval. To view the CPU Utilization
window, open the
Monitoring
folder and click the
CPU Utilization
link.
Figure 8- 2. CPU Utilization graph
Click Apply to implement the configured settings. The window will automatically refresh with
new updated statistics
The information is described as follows:
Parameter Description
Time Interval [1s ] Select the desired setting between 1s and 60s, where “s” stands for
seconds. The default value is one second.
Record Number [200] Select number of times the Switch will be polled between 20 and
200. The default value is 20.
Utilization Check whether or not to display Utilization.
To Next Page
Loading...
