DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
16
• Address table: Supports up to 8K MAC addresses per device
• Supports a packet buffer of up to 64 Megabytes
• Supports Port-based VLAN Groups
• Port Trunking with flexible load distribution and fail-over function
•
Supports IGMP Snooping
• Supports SNMP
• Supports Port Mirroring
•
MIB support for:
• RFC1213 MIB II
•
RFC1493 Bridge
• RFC1757 RMON
•
RFC1643 Ether-like MIB
• RFC2233 Interface MIB
•
Private MIB
• RFC2674 for 802.1p
• IEEE 802.1x MIB
• RS-232 DCE console port for Switch management
•
Provides parallel LED display for port status such as link/act, speed, etc.
Ports
•
Forty-eight (48) high-performance (MDI-X/MDI-II) ports for connecting to end
stations, servers, hubs, and other networking devices.
• All UTP ports can auto-negotiate between 10Mbps and 100Mbps, half-duplex and
full-duplex, and feature flow control.
• Two 1000BASE-T Mini-GBIC combo ports for connecting to another switch,
server, or network backbone.
• RS-232 DCE Diagnostic port (console port) for setting up and managing the Switch
via a connection to a console terminal or PC using a terminal emulation program.
Important Note:
For customers interested in D-View, D-Link Corporation’s proprietary SNMP management
software, go to the D-Link Website (www.dlink.com.cn) and download the software and
manual.
To Next Page
Loading...
