DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
70
Port VLAN ID(PVID)
In the Configuration menu, open the VLANs folder and click Port VLAN ID.
The
802.1Q Port Settings
dialog box, shown below, allows you to determine whether the
Switch will share its VLAN configuration information with other GARP VLAN Registration
Protocol (GVRP) enabled switches. In addition, Ingress Checking can be used to limit traffic
by filtering incoming packets whose PVID does not match the PVID of the port. Results can
be seen in the table under the configuration settings, as seen below.
Figure 6- 23. 802.1Q Port Settings and 802.1Q Port Table
To Next Page
Loading...
