DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
174
Device Name This field will display the Device Name of the switches in the SIM group
configured by the user. If no Device Name is configured by the name, it will
be given the name default and tagged with the last six digits of the MAC
Address to identify it.
Local Port
Displays the number of the physical port on the CS that the MS or CaS is
connected to. The CS will have no entry in this field.
Speed
Displays the connection speed between the CS and the MS or CaS.
Remote Port
Displays the number of the physical port on the MS or CaS that the CS is
connected to. The CS will have no entry in this field.
MAC Address
Displays the MAC Address of the corresponding Switch.
Model Name Displays the full Model Name of the corresponding Switch.
Click Close to close the Property window.
Menu Bar
The Single IP Management window contains a menu bar for device configurations, as seen
below.
Figure 10- 17. Menu Bar of the Topology View
The five menus on the menu bar are as follows.
File
Print Setup - Will view the image to be printed.
Print
Topology
- Will print the topology map.
Preference - Will set display properties, such as polling interval, and the views to
open at SIM startup.
Group
Add to group
- Add a Candidate to a group. Clicking this option will reveal the
following screen for the user to enter a password for authentication from the Candidate Switch
before being added to the SIM group. Click OK to enter the password or Cancel to exit the
window.
To Next Page
Loading...
