DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
115
Section 7
Management
Security IP
User Accounts
Access Authentication Control (TACACS)
SNMP V3
The following section will aid the user in configuring security functions for the Switch. The
Switch includes various functions for security, including TACACS, Security IPs, and SNMP,
all discussed in detail in the following section.
Security IP
Go to the Management folder and click on the Security IP link; the following screen will
appear.
Figure 7- 1. Security IP Management Setup
Use the
Security IP Management
to permit remote stations to manage the Switch. If you
choose to define one or more designated management stations, only the chosen stations, as
defined by IP address, will be allowed management privilege through the Web manager or
Telnet session. To define a management station IP setting, type in the IP address and click on
the Apply button.
User Accounts
Use the User Accounts Management window to control user privileges. To view existing
User Accounts
, open the
Security
Management
folder and click on the
User Accounts
link.
This will open the User Account Management page, as shown below.
Figure 7- 2. User Accounts Management Table
To add a new user, click on the Add button. To modify or delete an existing user, click on the
Modify button for that user.
To Next Page
Loading...
