DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
43
RMON Status Remote monitoring (RMON) of the Switch is Enabled or Disabled here.
802.1x Status
Enables or disables 802.1x; default is Disabled.
802.1x
Authentication
Protocol
The user may use the pull down menu to choose between Radius Eap and
Radius Pap for the 802.1x authentication protocol on the Switch. The default
setting is Radius Eap.
Asymmetric Vlan
This field will enable or disable Asymmetric VLANs on the Switch. The
default is Disabled.
Syslog Global State
Enables or disables Syslog State; default is Disabled.
Click Apply to implement changes made to this window.
NOTE: When the Asymmetric VLAN function is Disabled, the user must
change the VLAN setting on the Switch to its default configurations.
Port Configurations
This section contains information for configuring various attributes and properties for
individual physical ports, including port speed and flow control. Clicking on Port
Configurations in the Configuration menu will display the following window for the user:
To Next Page
Loading...
