DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
69
Figure 6- 22. 802.1Q Static VLANs Entry Settings – Modify
The following fields can then be set in either the Add or Modify 802.1Q Static VLANs
menus:
Parameter Description
VID
(VLAN ID)
Allows the entry of a VLAN ID in the Add dialog box, or displays the VLAN ID
of an existing VLAN in the Edit dialog box. VLANs can be identified by either
the VID or the VLAN name.
VLAN Name Allows the entry of a name for the new VLAN in the Add dialog box, or for
editing the VLAN name in the Edit dialog box.
Advertisement
Enabling this function will allow the Switch to send out GVRP packets to
outside sources, notifying that they may join the existing VLAN.
Port Settings Allows an individual port to be specified as member of a VLAN.
Tag
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking
the box will designate the port as Tagged.
None Allows an individual port to be specified as a non-VLAN member.
Egress
Select this to specify the port as a static member of the VLAN. Egress
member ports are ports that will be transmitting traffic for the VLAN. These
ports can be either tagged or untagged.
Forbidden Select this to specify the port as not being a member of the VLAN and that
the port is forbidden from becoming a member of the VLAN dynamically.
Click Apply to implement changes made.
To Next Page
Loading...
