DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
68
Figure 6- 20. Current 802.1Q Static VLANs Entries window
The 802.1Q Static VLANs menu lists all previously configured VLANs by VLAN ID and
name. To delete an existing 802.1Q VLAN, click the corresponding
button under the
Delete heading.
To create a new 802.1Q VLAN, click the Add button in the Static VLANs menu. A new menu
will appear, as shown below, to configure the port settings and to assign a unique name and
number to the new VLAN. See the table below for a description of the parameters in the new
menu.
Figure 6- 21. 802.1Q Static VLANs – Add
To return to the Current 802.1Q Static VLANs Entries window, click the Show All Static
VLAN Entries link. To change an existing 802.1Q VLAN entry, click the Modify button of
the corresponding entry you wish to modify. A new menu appears; use this to configure the
port settings and to assign a unique name and number to the new VLAN. See the table below
for a description of the parameters in the new menu.
To Next Page
Loading...
