DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
123
Figure 7- 12. Login Method List –Edit (default)
Figure 7- 13. Login Method List – Add
To define a Login Method List, set the following parameters and click Apply:
Parameter Description
Method List Name
Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4 The user may add one, or a combination of up to four (4) of the following
authentication methods to this method list:
tacacs – Adding this parameter will require the user to be authenticated
using the tacacs protocol from a remote tacacs server.
xtacacs – Adding this parameter will require the user to be authenticated
using the xtacacs protocol from a remote xtacacs server.
tacacs+ – Adding this parameter will require the user to be authenticated
using the tacacs protocol from a remote tacacs server.
server_group - Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured
on the Switch.
local - Adding this parameter will require the user to be authenticated using
the local user account database on the Switch.
none – Adding this parameter will require no authentication to access the
Switch.
To Next Page
Loading...
