DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
130
Auth-Protocol
None − Indicates that no authorization protocol is in use.
MD5 − Indicates that the HMAC-MD5-96 authentication level will be used.
SHA − Indicates that the HMAC-SHA authentication protocol will be used
.
Priv-Protocol
None
−
Indicates that no authorization protocol is in use.
DES
−
Indicates that DES 56-bit encryption is in use based on the CBC-DES
(DES-56) standard.
To return to the
SNMP User Table
, click the Show All SNMP User Table Entries link.
To add a new entry to the SNMP User Table Configuration, click on the Add button on the
SNMP User Table
page. This will open the
SNMP User Table Configuration
page, as
shown below.
Figure 7- 22. SNMP User Table Configuration
The following parameters can be set:
Parameter Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
Group Name
This name is used to specify the SNMP group created can request SNMP
messages.
SNMP Version
V1
– Specifies that SNMP version 1 will be used.
V2c – Specifies that SNMP version 2 will be used.
V3 – Specifies that SNMP version 3 will be used.
Auth-Protocol
MD5
− Specifies that the HMAC-MD5-96 authentication level will be used.
SHA
− Specifies that the HMAC-SHA authentication protocol will be used.
Priv-Protocol
None − Specifies that no authorization protocol is in use.
DES − Specifies that DES 56-bit encryption is in use, based on the CBC-
DES (DES-56) standard.
To Next Page
Loading...
