DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
88
Figure 6- 37. Link Aggregation Settings window – Add
Figure 6- 38. Link Aggregation Group Configuration window – Modify
The user-changeable parameters are as follows:
Parameter Description
Group ID
Select an ID number for the group, between 1 and 6.
State Trunk groups can be toggled between Enabled and Disabled. This is used to
turn a port trunking group on or off. This is useful for diagnostics, to quickly
isolate a bandwidth intensive network device or to have an absolute backup
aggregation group that is not under automatic control.
Master Port Choose the Master port for the trunk group.
Member Ports
Choose the members of a trunked group. Up to 8 ports per group can be
assigned to a group.
To Next Page
Loading...
