D-Link DGS-3324SR - SNMP Engine ID

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
138
Community String or
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click Apply. To return to the SNMP Host Table, click the Show All SNMP
Host Table Entries link.
SNMP Engine ID
The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to
identify the SNMP engine on the Switch.
To display the Switch’s SNMP Engine ID, open the SNMP Manager folder, and click on the SNMP Engine ID
link. This will open the SNMP Engine ID Configuration window, as shown below.
Figure 5- 12. SNMP Engine ID Configuration
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.