16D-Link DIR-457U User Manual
Section 3 - Device Setup using D-Link Connection Manager (Windows)
Profile Management
Editing
1. Click the Prole button.
2. Select a prole and click the Edit button.
3. Click the appropriate tab and enter the information in the elds.
4. Click the Advanced button to display a list of operators and their areas
in the window below.
5. Click OK to close the APN window.
6. Click OK to close the Edit Prole window.
Note: Proles may only be edited when you are disconnected.
Deleting a Prole
Click the Prole button.
Select a user-dened prole and click the Delete button.
Click Yes to conrm the deletion.
Deleting All Proles
Click the Prole button.
Click the Delete All button.
Setting the Default Prole
Click the Prole button.
Highlight the prole to use when the DIR-457U is started.
Click Set as Default prole.
Reset to Factory Default
Click the Prole button.
Click Set as Factory Default to return the DIR-457U to the factory
settings.
Under the Proles icon, users can create, edit and delete proles as well as preset proles.
Profile
To Next Page
Loading...
