D-Link DNS-1560-04

Copyright@2014 D-Link System, Inc. All Rights Reserved.
65
D-Link Document – User Manual
This table shows the column descriptions.
Column Name
Description
Task name
The task name.
ZFS
The source name of the file system or volume.
Target IP
Local or the remote target IP.
Target ZFS
The target name of the file system or volume.
Status
Standby or Running.
Schedule
Disabled or scheduled.
Created time
The created time of the task.
Last executed
time
The last executed time.
Result
The physical disk slots of the RAID set.
Spare slot
The spare physical disk slot.
The functions available in this tab are:
 Create: Add a replication task.
 Start: Start the task.
 Stop: Stop the task.
 Schedule: Schedule the task.
 Delete: Delete the task.
Take an example of adding a task.
1. Click Create icon.
2. Enter the Task name, and select a file system or volume to replicate. Then click Next button.
3. Select the Local cloning or Remote replication. Remote replication needs to enter the target
IP, username and password. And then click Next button.
4. Select the target pool and enter a name. And then click Next button.
5. At the confirmation message, click Apply button.
Amazon S3
The Amazon S3 tab is used to setup the popular cloud backup service provided by Amazon. Before
using the service, you must register an Amazon S3 account first at http://aws.amazon.com/s3/
.
There is no limit to the number of how many Amazon S3 tasks can be created. If you experience
slow system performance, please reduce the Amazon S3 tasks.