EasyManuals Logo

D-Link DSL-226 User Manual

D-Link DSL-226
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
50D-Link DSL-226 User Manual
Section 4 - Conguration
Advanced Settings (continued)
Group Key
Interval:
Enter the Group Key Interval (10 - 4194303) the timing for rekeying
the group temporal key. The default is 3600 seconds.
If you selected Pre-shared key, an alphanumeric passphrase will be required, enter it in the
password eld above. Note the password must contain 8 to 63 characters and include a mix
of uppercase and lowercase letters, numbers, and special characters except the following:
/ ` & % " |. The following options are also available:
Cipher Type:
Select either AES, TKIP or Both (AES/TKIP). The options vary
depending on the WPA type selected. AES is recommended if other
types are presented.
Group Key
Interval:
Enter the Group Key Interval (10 - 4194303) as the timing for rekeying
the group temporal key. The default is 3600 seconds.
WEP
Wireless Equivalent Privacy (WEP) oer only basic encryption capability and is
less secure than WPA. Thus, WPA is the preferred method.
Security:
WEP-64Bit: Enter 5 alphanumeric characters.
WEP-128Bit: Enter 13 alphanumeric characters.
Note: WPS will be disabled when WEP is used.
Authentication Type
Select either Shared or Open. These two types dier in the authentication
process before association with an access point.
Click Save when you are done. The following pages describe more
conguration options in Advanced Settings in detail.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-226 and is the answer not in the manual?

D-Link DSL-226 Specifications

General IconGeneral
BrandD-Link
ModelDSL-226
CategoryNetwork Router
LanguageEnglish

Related product manuals