EasyManuals Logo

D-Link DSL-2730E User Manual

D-Link DSL-2730E
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
DSL-2730E User Manual
Field Description
operation systems that support the DHCP client.
IP Pool Range
It specifies the first and last IP addresses in the IP
address pool. The router assigns IP address in the
IP pool range to the host.
Max Lease Time
The lease time determines the period that the host
retains the assigned IP addresses before the IP
addresses change.
Domain Name
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system
name) on each individual PC. The domain name
can be assigned from the router through the DHCP
server.
DNS Servers
You can configure the DNS server ip addresses for
DNS Relay.
Click the button Show Client to display the page Active DHCP Client Table as
shown below. It shows the IP addresses assigned to DHCP clients.
The following table describes the parameters and buttons in this page:
Field
Description
IP Address
It displays the IP address assigned to the DHCP
client from the router.
MAC Address
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address.
20

Other manuals for D-Link DSL-2730E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2730E and is the answer not in the manual?

D-Link DSL-2730E Specifications

General IconGeneral
BrandD-Link
ModelDSL-2730E
CategoryNetwork Router
LanguageEnglish

Related product manuals