D-Link DSL-2730E - Ipv6 Dns

DSL-2730E User Manual
The following table describes the parameters and buttons of this page:
Field Description
Attain DNS
Automatically
Select it, the router accepts the first received DNS
assignment from one of the PPPoA, PPPoE or MER
enabled PVC(s) during the connection establishment.
Set DNS
Manually
Select it, enter the IP addresses of the primary and
secondary DNS server.
Apply Changes
Click it to save the settings of this page.
Reset Selected
Click it to start configuring the parameters in this page.
3.3.9.2 IPv6 DNS
Choose Advanced > DNS > IPv6 DNS. The IPv6 DNS Configuration page
shown in the following figure appears. You may configure the ipv6 addresses of
DNS servers.
57