DSL-2730E User Manual
Field
Description
RTS Threshold
(Request to
Send
Determines the packet size of a transmission through
the use of the router to help control traffic flow.
Beacon Interval
A packet of information that is sent from a connected
device to all other devices where it announces its
availability and readiness. A beacon interval is a period
of time (sent with the beacon) before sending the
beacon again. The beacon interval may be adjusted in
DTIM Interval
Sets the wake-up interval for clients in power-saving
mode.
Preamble Type
This is the length of the CRC (Cyclic Redundancy
Check) block for communication between the router
and wireless clients. High network traffic areas should
select Short preamble type.
Broadcast
SSID
With Disabled selected, no wireless clients will be able
to see your wireless network when they scan to see
Click Apply Changes to save the settings.
3.3.1.2 Access Control
Choose Advanced > Advanced Wireless > Access Control. The page shown
in the following figure appears. Incoming connection can be filtered on your
wireless router based on their MAC addresses.
39
To Next Page
Loading...
Need help?
General
