DSL-2730E User Manual
3.3.1 Advanced Wireless
This function is used to modify the standard 802.11g wireless radio settings. It is
suggested not to change the defaults, as incorrect settings may reduce the
performance of your wireless radio. The default settings provide the best wireless
radio performance in most environments.
3.3.1.1 Advanced Settings
Choose Advanced > Advanced Wireless > Wireless Advanced. The page
shown in the following figure appears. These settings are only for more
technically advanced users who have sufficient knowledge about wireless LAN.
Do not change these settings unless you know the effect of changes on the
device.
The following table describes the parameters in this page.
Field
Description
Fragment
Threshold
Used to fragment packets which help improve
performance in the presence of radio frequency (RF)
interference.
38
To Next Page
Loading...
Need help?
General
