D-Link DSL-2730E User Manual

DSL-2730E User Manual
3.3.12 Routing
Under this menu, static route, default gateway and RIP type routing
configurations can be performed.
3.3.12.1 Static Route
Choose Advanced > Routing > Static Route. The Routing Configuration
page shown in the following figure appears. This page is used to configure the
routing information. You may add or delete IP routes.
The following table describes the parameters and buttons of this page:
72

D-Link DSL-2730E Specifications

General

Brand	D-Link
Model	DSL-2730E
Category	Network Router
Language	English