D-Link DSL-2730E User Manual

DSL-2730E User Manual
Field Description
characters), enter any 13 ASCII characters.
 If you choose 128-bit and Hex (26 characters),
enter any 26 hexadecimal characters.
Apply Changes
Click it to apply the settings temporarily. If you want
to save the settings of this page permanently, click
Save in the lower left corner.
Click Apply Changes to save the settings.
3.2.5 Time and Date
Choose Setup > Time and Date. The System Time Configuration page
appears. In the page, you can configure, update and maintain the correct time on
the internal system clock. You can set the time zone that you are in and the
Network Time Protocol (NTP) server. You can also configure daylight saving to
automatically adjust the time when needed.
The following table describes the parameters in this page.
Field
Description
System Time
Displays the time currently maintained by the router. If
this is incorrect, use the following options to configure
the time correctly.
36

D-Link DSL-2730E Specifications

General

Brand	D-Link
Model	DSL-2730E
Category	Network Router
Language	English