D-Link DSL-2730E - Page 38

DSL-2730E User Manual
The following describes the parameters of this page:
Field Description
Key Length
Choose the WEP key length. You can Choose
64-bit or 128-bit.
Key Format
 If you choose 64-bit, you can choose ASCII (5
characters) or Hex (10 characters).
 If you choose 128-bit, you can choose ASCII
(13 characters) or Hex (26 characters).
Default Tx Key
Choose the index of WEP Key. You can choose Key
1, Key 2, Key 3 or Key 4.
Encryption Key 1
to 4
The Encryption keys are used to encrypt the data.
Both the modem and wireless stations must use the
same encryption key for data transmission.
 If you choose 64-bit and ASCII (5 characters),
enter any 5 ASCII characters.
 If you choose 64-bit and Hex (10 characters),
enter any 10 hexadecimal characters.
 If you choose 128-bit and ASCII (13
35