DSL-2730E User Manual
There are two methods for the wireless client to establish connection with the
modem through WPS.
For one method, click Regenerate PIN to generate a new PIN, and then click
Start PBC. In the wireless client tool, enter the PIN which is generated by the
modem to start connection. The client will automatically establish the connection
with the modem through the encryption mode, and you need not to enter the key.
For the other method, the wireless client generates PIN. In the above figure,
enter PIN of the wireless client in the Client PIN Number field, then click Start
PIN to establish the connection.
Note:
The wireless client establishes the connection with the modem through WPS
negotiation. The wireless client must support WPS.
41
To Next Page
Loading...
Need help?
General
