DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
PPP debug
Move the switch to the right if you want to log all data on PPP
connection debugging.
Figure 89. The page for creating a new Mobile Internet connection. The Health Check section.
Parameter Description
Health Check
Enable
Move the switch to the right to check the connection health using
the ICMP ping mechanism.
The maximum number
of attempts
A number of requests to check the health of the connection. By
default, the value 10 is specified.
Several ping requests are sent to check the hosts. After several
failed attempts the connection status is changed until a successful
attempt is made.
Timeout
A time period (in seconds) allocated for a respond to one ping
request. By default, the value 3 is specified.
Page 110 of 311
To Next Page
Loading...
