DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Overview
LED Mode Description
LAN 1-4
Solid green
A device is connected to the port of the router (for the
LAN port configured as the WAN port: the router is
connected to an Ethernet line).
Blinking green
Data transfer through the relevant LAN port.
No light
The cable is not connected to the relevant port.
WLAN 2.4G
WLAN 5G
Solid green
The router's WLAN of the relevant band is on.
Blinking green
Data transfer through the Wi-Fi network of the relevant
band.
No light
The router's WLAN of the relevant band is off.
WPS
Blinking green
Attempting to add a wireless device via the WPS
function.
No light
The WPS function is not in use.
USB
Solid green
A USB device is connected to the router's USB port.
No light
No USB device.
FXS 1-2
Solid green
The phone is registered on the SIP server.
Blinking green
An attempt to register on the SIP server.
Fast blinking green
An incoming call or talking.
No light
The phone is not registered on the SIP server, because
registration is disabled or the corresponding connection
is off.
In case the Power, Internet, WPS, USB, and FXS 1-2 LEDs are blinking green at the same time,
the device is in the emergency mode. Power the device off and on. If the device is loaded in the
emergency mode again, restore the factory default settings via the hardware RESET button.
Page 18 of 311
To Next Page
Loading...
Need help?
General
