D-Link DVG-5402G

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Path
Locate data of the Transmission client. To do this, click the Search
icon ( ), select the needed value, and click the SELECT button.
Directory
The folder on the USB storage where data of the Transmission client
will be stored.
Enable download queue
Move the switch to the right if you want to limit the number of
simultaneous downloads. Upon that the Download queue size
field will be displayed.
Move the switch to the left not to limit the number of simultaneous
downloads.
Download queue size
The maximum number of simultaneous downloads. By default, the
value 1 is specified.
Peer limit
The maximum number of the service users from which you can
download files.
Enable download speed
limit
Move the switch to the right to limit the maximum file download
speed. In the Download speed limit field displayed, specify the
maximum value of speed (KBps).
Move the switch to the left not to limit the maximum download
speed.
Use uTP
Move the switch to the right to enable μTP (Micro Transport
Protocol, a transport protocol for file sharing). Such a setting can
increase the load on the router.
Move the switch to the left to disable μTP.
Web interface port
The port on which the web-based interface of the Transmission
client is available.
Authorization
Enable
Move the switch to the right if you want the Transmission client to
request for username and password when accessing its web-based
interface. Then fill in the Username and Password fields.
Username
The username to access the web-based interface of the Transmission
client.
Password
The password to access the web-based interface of the Transmission
client.
After specifying the needed parameters, click the SAVE button.
Page 185 of 311