D-Link DVG-5402G

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
SIP Proxy
Address
An IP or URL address of the SIP proxy server.
Port
A port of the SIP proxy server. Unless another setting is given by
your ISP, it is recommended to leave the default value (5060).
SIP Outbound Proxy
Address
An IP or URL address of the SIP outbound proxy server.
Port
A port of the SIP outbound proxy server. Unless another setting is
given by your ISP, it is recommended to leave the default value
(5060).
Backup SIP proxy
Address
An IP or URL address of the backup SIP proxy server. The router
uses the backup SIP proxy server in case of no response from the
main SIP proxy server.
Port
A port of the backup SIP proxy server. Unless another setting is
given by your ISP, it is recommended to leave the default value
(5060).
Unregister when
switching
If the switch is moved to the right, upon switching between the main
SIP proxy server and the backup SIP proxy server and backwards,
the router unregisters on the current registration server by sending
special SIP packets in order to complete the registration session
before it expires.
If the switch is moved to the left, upon switching between the main
SIP proxy server and the backup SIP proxy server and backwards,
the router stays registered until the registration session expires.
Allow call without
registration
Move the switch to the right to allow calls without registration on
the main SIP proxy server.
Backup route
An IP or URL address to which calls will be forwarded if the main
or backup SIP proxy servers are unavailable.
Backup route port
A port of the backup route. Unless another setting is given by your
ISP, it is recommended to leave the default value (5060).
Page 234 of 311