D-Link DWR-932C - Connect via Wi-Fi

11D-Link DWR-932C User Manual
Section 3 - Conguration
Connect via Wi-Fi
Note: The following example uses Windows 7’s built-in wireless connection utility. If you are using a dierent operating system, or a third party connection
utility, the process may be dierent. Please refer to the documentation that came with your operating system or wireless client for further information on
how to connect to a wireless network.
To connect to the router using Wi-Fi, open your operating system’s wireless networking utility
and scan for available networks to connect to. By default, the network name (SSID) of the
DWR-932C will be in the format dlink_DWR-932C_xxxx, where “xxxx” represents the last
four character’s of the DWR-932C’s MAC address. The default SSID and password can also be
found on the product label situated under the battery. For more information on where to nd
this label refer to Hardware Overview on page 4.
Once you have located your DWR-932C’s wireless network, connect to it.
dlink_DWR-932C_0816
dlink_DWR-932C_0816