D-Link DWR-932C - DHCP Service

31D-Link DWR-932C User Manual
Section 3 - Conguration
If you selected Congure DHCP:
DHCP Service
Here you can congure the IP address for the DWR-932C, as well as the range
of IP numbers that the DHCP will give out.
DHCP Service
IP Address
Subnet
IP Range
Enable/disable the DHCP Server.
Click on the last digit to alter your router’s current IP
address.
The subnet number that your router is currently using.
Click on the last two digits to alter the range of
numbers that the DHCP server will give out.
Click Apply to save changes.