D-Link DWR-932C User Manual

44D-Link DWR-932C User Manual
Section 3 - Conguration
Firewall Enable
DMZ Settings
PPTP Pass Through
IPsec Pass Through
L2TP Pass Through
WAN Ping Blocking
Access from WAN
Firewall Settings
A rewall protects your network from the outside world, helping to prevent cyber attacks. This page allows you to alter your
router’s rewall settings.
Clicking this toggle activates the IP Filter. For more
information see IP Filter on page 46
DMZ is short for Demilitarized Zone. Clicking this
toggle will expose a chosen computer to the outside
world by completely disabling all rewalls.
Note: Only recommend for advanced users, enabling this
option will potentially expose your computer to cyber
attacks over the Internet.
Allows multiple machines on the LAN to connect to
their corporate network using PPTP protocol.
Allows multiple machines on the LAN to connect to
their corporate network using IPsec protocol.
Allows multiple machines on the LAN to connect to
their corporate network using L2TP protocol.
The DWR-932C will not respond to pings.
Clicking this toggle allows access from WAN.
Click Apply to save changes.
Firewall Settings

D-Link DWR-932C Specifications

General

Model	DWR-932C
Category	Wireless Router
Frequency Band	2.4 GHz
SIM Support	Yes
Battery Capacity	2000 mAh
Security	WPA/WPA2
Wireless Speed	Up to 150 Mbps
Cellular Technology	4G LTE
Antennas	Internal
Wireless Standard	802.11n
Interfaces	Micro-USB
Weight	77 g