D-Link DWR-932C - DHCP Settings

42D-Link DWR-932C User Manual
Section 3 - Conguration
DHCP Settings
Here you can enable your router’s DHCP Service, congure the IP address for the DWR-932C as well as the range of IP numbers
that the DHCP will give out.
DHCP Service
IP Address
Subnet
IP Range
Enable/disable the DHCP Service.
Click on the last digit to alter your router’s current IP
address.
The subnet number that your router is using.
Click on the last digits to alter the range of numbers
that the DHCP server will give out.
Click Apply to save changes.
DHCP Service