D-Link DWR-932C User Manual

30D-Link DWR-932C User Manual
Section 3 - Conguration
Router LAN Settings
This section lets you set up network settings for the device.
Displays your current LAN status.
LAN Setting
LAN Setting
To DHCP Service Setting
Congure DHCP
Current DHCP Service
IP Address
Subnet
IP Range
The DWR-932C has a built-in DHCP server which can assign IP addresses to
connected clients. This section shows your current settings and allows you
to congure the IP address for the DWR-932C as well as congure its DHCP
settings.
This button takes you through to DHCP Settings where
you can congure your IP address and IP range.
Shows if you are using the DHCP Service.
Router’s current IP address.
The subnet number that your router is using.
The range of numbers that the DHCP server will give
out.

D-Link DWR-932C Specifications

General

Model	DWR-932C
Category	Wireless Router
Frequency Band	2.4 GHz
SIM Support	Yes
Battery Capacity	2000 mAh
Security	WPA/WPA2
Wireless Speed	Up to 150 Mbps
Cellular Technology	4G LTE
Antennas	Internal
Wireless Standard	802.11n
Interfaces	Micro-USB
Weight	77 g