D-Link DWR-932C - Connection Settings

17D-Link DWR-932C User Manual
Section 3 - Conguration
Connection Settings
APN Selection Mode
Allow Data Roaming
APN
User Name and
Password (optional)
Choose to either automatically or manually select
an APN.
Select this if you want to allow data roaming.
Enter your service provider’s APN.
Enter the username and password provided by your
service provider.
Auto (PAP & CHAP)
PAP
CHAP
Both PAP and CHAP combined.
Select this if your service provider uses this protocol.
Password Authentication Protocol. Select this if your
service provider uses this protocol.
Challenge Handshake Authentication Protocol.
Select this if your service provider uses this protocol.
Click Next to move to the next section.
In this section you can congure your connection settings. Depending on your mobile service provider, you may have to input
additional settings before use. If so, please contact your service provider for this information.
If you choose to manually select your APN.
APN For LTE/3G
If you selected Basic Protection: