D-Link DWR-932C - Add Port Forwarding

49D-Link DWR-932C User Manual
Section 3 - Conguration
If you selected Add Port Forwarding
Add Port Forwarding
Destination IP Address
Protocol
Port Number
Destination Port Range
The IP address you want to allow port forwarding on.
Select the protocol for ports that you want to allow or
deny access to. Choose between TC P, UDP or Other .
Click the toggle to enter the ports you want port
forwarding on.
Enter a single port or a range of ports that you wish
to allow port forwarding on. Separate port numbers
with a comma.
Click Apply to proceed.