D-Link Nuclias Connect DAP-2610

D-Link DAP-2610 User Manual
18
Wireless Band:
Mode:
Network Name (SSID):
Auto Channel Selection:
Channel:
Channel Width:
Site Survey:
Select either 2.4 GHz or 5 GHz from the drop-down
menu.
Wireless Client is selected from the drop-down menu.
Service Set Identier (SSID) is the name designated
for a specic wireless local area network (WLAN). The
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in Wireless Client mode.
The channel used will be displayed, and matches the
AP that the DAP-2610 is connected to when set to
Wireless Client mode.
Click the drop-down menu to select 20 MHz, Auto
20/40 MHz or Auto 20/40/80 MHz. Select 20 MHz if
you are not using any 802.11n wireless clients. Auto
20/40 MHz allows you to connect to both 802.11n
and 802.11b/g or 802.11a wireless devices on your
network.
Click on the Scan button to search for available
wireless networks, then click on the available network
that you want to connect with.
Wireless Client Mode