D-Link Nuclias Connect DAP-2610

D-Link DAP-2610 User Manual
42
Captive Portal
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, user can view and congure the Captive Portal settings. After selecting Web Redirection Only as the Authentication Type,
we can congure the redirection website URL that will be applied to each wireless client in this network.
Authentication Settings - Web Redirection Only
Session timeout
(1-1440):
Band:
SSID Index:
Authentication Type:
Web Redirection State:
URL Path:
IPIF Status:
VLAN Group:
Enter the session timeout value here. This value
can be from 1 to 1440 minutes. By default, this
value is 60 minutes.
Select 2.4GHz or 5GHz.
Select the SSID for this authentication.
Select the captive portal encryption type
here. The options to choose from are
Web Redirection, Username/Password,
Passcode, Remote RADIUS, LDAP and
POP3. In this section we’ll discuss the Web
Redirection option.
Default setting is Enable when select Web
Redirection Only.
Select whether to use either HTTP or HTTPS
here. After selecting either http:// or https://,
enter the URL of the website that will be used
in the space provided.
Select to Enable or Disable the Captive Portal
with its IP interface feature here.
Enter the VLAN Group ID here.