D-Link Nuclias Connect DAP-2610

D-Link DAP-2610 User Manual
48
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, you can view and congure the Captive Portal settings. After selecting Remote RADIUS as the authentication type, we can
congure the Remote RADIUS authentication that will be applied to each wireless client in this network.
Authentication Settings - Remote RADIUS
Session timeout
(1-1440):
Band:
SSID Index:
Authentication Type:
Web Redirection State:
URL Path:
IPIF Status:
VLAN Group:
Get IP From:
Enter the session timeout value here. This value can be
from 1 to 1440 minutes. By default, this value is 60 minutes.
Select 2.4GHz or 5GHz.
Select the SSID for this authentication.
Select the captive portal encryption type here. Options
to choose from are Web Redirection, Username/
Password, Passcode, Remote RADIUS, LDAP and POP3.
In this section we’ll discuss the Remote RADIUS option.
Select Enable to enable the website redirection
feature.
Select whether to use either HTTP or HTTPS here. After
selecting either http:// or https://, enter the URL of the
website that will be used in the space provided.
Select to Enable or Disable the Captive Portal with its
IP interface feature here.
Enter the VLAN Group ID here.
Static IP (Manual) is chosen here. Choose this option
if you do not have a DHCP server in your network, or if
you wish to assign a static IP address to the DAP-2610.
When Dynamic IP (DHCP) is selected, the other elds
here will be grayed out. Please allow about 2 minutes
for the DHCP client to be functional once this selection
is made.