D-Link Nuclias Connect DAP-2610

D-Link DAP-2610 User Manual
63
Quality of Service (QoS) enhances the experience of using a network by prioritizing the trac of dierent applications. The DAP-2610 supports
four priority levels. Once the desired QoS settings are nished, click the Save button to let your changes take eect.
Enable QoS:
Downlink Bandwidth:
Uplink Bandwidth:
ACK/DHCP/ICMP/DNS Priority:
Web Trac Priority:
FTP Trac Priority:
User Dened-1/2/3/4 Priority:
Other Trac Priority:
Check this box to allow QoS to prioritize trac.
Use the drop-down menus to select the four
levels of priority. Click the Save button when
you are nished.
The downlink bandwidth in Mbits per second.
This value is entered in the Uplink/Downlink
Settings window.
The uplink bandwidth in Mbits per second.
This value is entered in the Uplink/Downlink
Settings window.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level
of priority for the selected rule.
QoS