D-Link Nuclias Connect DAP-2610

D-Link DAP-2610 User Manual
44
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, you can view and congure the Captive Portal settings. After selecting Username/Password as the authentication type, you
can congure the Username/Password authentication that will be applied to each wireless client in this network.
Authentication Settings - Username/Password
Session timeout
(1-1440):
Band:
SSID Index:
Authentication Type:
Web Redirection State:
URL Path :
IPIF Status:
VLAN Group:
Enter the session timeout value here. This value
can be from 1 to 1440 minutes. By default, this
value is 60 minutes.
Select 2.4GHz or 5GHz.
Select the SSID for this authentication.
Select the captive portal encryption type
here. The options to choose from are Web
Redirection, Username/Password, Passcode,
Remote RADIUS, LDAP and POP3. In this
section we’ll discuss the Username/Password
option.
Select Enable to enable the website redirection
feature.
Select whether to use either HTTP or HTTPS
here. After selecting either http:// or https://,
enter the URL of the website that will be used
in the space provided.
Select to Enable or Disable the Captive Portal
with its IP interface feature here.
Enter the VLAN Group ID here.