D-Link DAP-2610 User Manual
32
VLAN
The DAP-2610 supports VLANs. VLANs can be created with a name and VID. Mgmt (TCP stack), LAN, primary/multiple SSID, and WDS connections
can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2610 without a VLAN tag will have a VLAN tag inserted
with a PVID. The VLAN List tab displays the current VLANs.
VLAN Status:
VLAN Mode:
Use the radio button to check Enable. Next, go
to the Add/Edit VLAN tab to add or modify an
item on the VLAN List tab.
The current VLAN mode is displayed.
VLAN List
To Next Page
Loading...
